SIIG Serial ATA PCI RAID Bedienungsanleitung PDF herunterladen (Seite 31)

User's Manual

3-4

3-3.1 Windows 98/98 SE Driver Installation

For a new Windows 98/98 SE system

1. Setup the RAID array prior to the Windows installation.

2. Follow Microsoft procedures to install Windows 98

accordingly.

3. Once Windows has installed and booted, double click My

Computer/Control Panel/System. Select Device Manager

tab.

4. Double click PCI RAID controller listed under Other

Devices.

5. Select Driver tab then click Update Driver button.

6. Insert the Software Installation diskette into the floppy drive

then click Next.

7. Select Search for the best driver for your device option, then

click Next.

8. Check Specify a location, type in A:, then click Next. Click

Next again and then Finish.

9. Remove the Software Installation diskette and restart

Windows to complete driver installation.

For an existing Windows 98/98SE installation

1. After installing the board, boot up to Windows 98, the Add New

Hardware Wizard dialog box will appear. Click Next to

continue.

2. Select Search for the best driver for your device option then

click Next.

3. Insert the Software Installation diskette into the floppy drive.

Check Specify a location, type A:, then click Next.

4. Click Next, and then Finish respectively.

5. Remove the Software Installation diskette and restart

Windows to complete driver installation.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 53 54

Keine Kommentare

SIIG Serial ATA PCI RAID Bedienungsanleitung Seite 31