SIIG Serial ATA PCI RAID Bedienungsanleitung PDF herunterladen (Seite 16)

RAID

2-5

5. Choose which type of RAID set to create.

For a Striped Set, press F1. The following screen appears:

Select the chunk size to be used in RAID 0 set:

A=Auto Configure; 0=1k 1=2k 2=4k 3=8k 4=16k 5=32k 6=64k

7=128k 8=256k 9=.5M

Your selection?

What is Auto Configure? Auto Configure allows the CMD

RAID utility to choose the chunk size and drives to be used in

the desired RAID set. It will always choose a 64k chunk size as

the default, and will always use drives from different channels

if possible. Like the rest of the utility, if Auto Configure is

selected, simply follow the prompts given.

6. Choose the chunk size desired (for example, press 6 for 64K

chunk size). Once done, the following line appears:

Enter the total number of drives in Striped set:

7. A Striped set must have between 2 and 4 drives as members.

Choose the number of drives and the following line appears (for

example, choose 2):

Enter the first drive number in Striped set:

Note: The TOTAL size of a Striped set is the size

of the smallest drive multiplied by the number of

drives included in the set.

8. Choose which drives to be used in Striped set. For optimal

throughput, choose drives from both channels (Primary and

Secondary). After entering the first drive (for example, choose

0), the following line appears:

Enter the second drive number in Striped set:

9. Enter the second disk drive number (for example, press 2). After

all drives for the Striped set are entered, the following line

appears:

Are you sure? (Y/N)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Keine Kommentare

SIIG Serial ATA PCI RAID Bedienungsanleitung Seite 16