SIIG USB Over IP Installationsanleitung PDF herunterladen (Seite 4)

Hardware Installation

General hardware installation instructions are provided

below.

Static Electricity Discharge may permanently damage

your system. Discharge any static electricity build up in

your body by touching your computer case for a few

seconds.

1. Connect one end of your Ethernet cable to the

Ethernet Port of the USB over IP.

2. Connect the other end of the Ethernet cable to an

available RJ45 port on your Ethernet switch or hub.

3. Plug the power adapter into the USB over IP, then

plug the power adapter into a reliable power source.

4. Wait for the USB over IP to complete it's initialization/

bootup sequence and the Ready LED to light up

before proceeding to Driver Installation.

Driver Installation

This section provides information on how to install the

USB over IP drivers. Windows Firewall/Internet

Connection Sharing (ICS) must be running before

installing the USB over IP drivers.

Windows 7 (32-bit)

1. Connect the USB over IP to your network.

2. At the Windows desktop insert the driver CD.

At the Auto Play window: click Open folder to view

files.

If Auto Play doesn't start: Double click Computer,

right click the CD\DVD-ROM drive showing the

SIIG USBIP icon, click Open.

1 2 3 4 5 6 7 8 9 ... 15 16

Keine Kommentare

SIIG USB Over IP Installationsanleitung Seite 4