SIIG SC-SA0S11-S1 Installationsanleitung PDF herunterladen (Seite 7)

RAID 0 (Striping)

This RAID array to be used on New/Blank hard

drives. Striping will destroy existing data on the

hard drive.

1. As the BIOS boots press Ctrl+M when

prompted to enter the RAID BIOS.

2. At the next screen select HBA 0: Marvell

0, press Enter. Select Configuration Wizard,

then press Enter.

3. Use Up or Down arrow key to choose hard

drive. Press Spacebar to select the hard

drive. Perform the same procedure with the

other hard drive. Once both hard drives are

selected, press Enter.

4. Select RAID Level or HyperDuo, press

Enter. Select RAID 0, then press Enter.

5. Select Next, press Enter. When asked Do

you want to create this virtual disk? press

Y to select Yes.

6. Press F10 to exit the BIOS. When asked Do

you want to exit from Marvell BIOS Setup?

press Y to exit and reboot.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Keine Kommentare

SIIG SC-SA0S11-S1 Installationsanleitung Seite 7