SIIG SC-SA0R11-S1 Installationsanleitung

1IntroductionThe DP SATA 6Gb/s 4-Port Hybrid PCIe is a highperformance SATA host adapter designed toadd four internal Serial ATA 6Gb/s channelsand two

106. Press F10 to exit the BIOS. When asked Doyou want to exit from Marvell BIOS Setup?press Y to exit and reboot.RAID 10 (Mirror+Striping)Four drive

116. Press F10 to exit the BIOS. When asked Doyou want to exit from Marvell BIOS Setup?press Y to exit and reboot.Rebuilding a Failed Mirror SetWhen

127. Press F10 to exit the BIOS. When asked Doyou want to exit from Marvell BIOS setup?press Y to exit and reboot.Deleting RAID ArraysDeleting a RAID

13Driver InstallationThis section provides information on how toinstall the drivers.Windows 8 (32-/64-bit) / Windows 7 (32-/64-bit) / Server 2008 R2Fo

146. For 32-bit: Type D:\Drivers\storport\i386,click Next. (Change D: to match your CD-/DVD-ROM drive letter)For 64-bit: Type D:\Drivers\storport\amd6

155. For 32-bit: Type D:\Drivers\storport\i386,click Next. (Change D: to match yourCD-/DVD-ROM drive letter)For 64-bit: Type D:\Drivers\storport\amd

165. Right click Marvell Console ATA Deviceunder Other devices, click Update DriverSoftware.6. Click Browse my computer for driversoftware.7. Insert

173. For Windows Vista: Click Computer, clickManage, click Continue, click DeviceManager.For Server 2008: Click Computer, clickManage. Double click

18Windows XP (32-/64-bit) / Server 2003(32-/64-bit)Important: New Installation is not supported byWindows XP and Windows Server 2003.For Existing Inst

196. Click Finish.7. Repeat steps 2-6.8. Restart the computer.To Verify Windows Installation1. Use Device Manager to verify installation.For Windows 8

2System Requirements• Desktop PC with an available 4-lane (ormore) PCIe slot• Windows® 8 (32-/64-bit) / 7 (32-/64-bit) /Vista (32-/64-bit) / XP (32-/6

20Marvell Storage UtilityFollow the instuctions below to install the MarvellStorage Utility GUI.1. Double click MSUSetup in the GUI folderon your soft

2110. Type in the Username and Password to login. Username and Password are yourWindows user name and password. If youhave a user name but no password

22Figure 4

23Technical Support and WarrantyQUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site atwww.siig.com and click Support. Our onl

PRODUCT NAMEDP SATA 6Gb/s 4-Port Hybrid PCIeFCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS BOPERATING ENVIRONMENT: FOR HOME OR OFFICE USEFCC COMP

3eSATA 6eSATA 5SATA 3 (bottom)& SATA 4 (top)*SATA 1(bottom)& SATA 2(top)2 eSATAconnectorsHDD LED (optional)4 SATAinternalconnectorsLayoutFigur

4Jumper SettingsRefer to Figure 1 for the positions of eachconnectors. SATA 1, 2 and eSATA 5, 6 areinterchangeable. Follow the instructions in Table1

5Hardware InstallationFor Low profile systems, install the spare lowprofile bracket now.General instructions for installing the card areprovided below

65. Carefully align the card's bus connectorwith the selected PCI Express slot on themotherboard. Push the board down firmly,but gently, until it

74. Attach the other end of the Serial ATA datacable to the Serial ATA connector on the DPSATA 6Gb/s 4-Port Hybrid PCIe.5. Follow the same instruction

8RAID 0 (Striping)This RAID array to be used on New/Blank harddrives. Striping will destroy data on the harddrive. A minimum of 2 drives are needed t

96. Press F10 to exit the BIOS. When asked Doyou want to exit from Marvell BIOS Setup?press Y to exit and reboot.RAID 1 (Mirror)Two drives are needed