SIIG SC-SA0S11-S1 Installationsanleitung PDF herunterladen (Seite 6)

6

4. Attach the other end of the Serial ATA data

cable to the Serial ATA connector on the DP

SATA 6Gb/s 2-Port Hybrid PCIe.

5. Follow the same instructions to connect the

second hard drive, if needed. Device

connection is now complete.

RAID Arrays

This controller can be configure for hardware

RAID 0 and 1, if needed. If you don't need RAID

0 or 1, please proceed to Driver Installation in

page 10. RAID Arrays are setup in the DP SATA

6Gb/s 2-Port Hybrid PCIe BIOS.

Note: After RAID 0 or RAID 1 setup, you

can rename the VD Name. This is optional.

Figure 2. SATA hard disk drive connections

3. Connect one end of the Serial ATA cable to

the hard disk drive.

Serial ATA

Power

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare