SIIG PCI-1S+DOS Bedienungsanleitung PDF herunterladen (Seite 8)

To Verify Windows 2000/XP/2003 Installation

1. Right click My Computer, click Manage, then select

Device Manager.

2. Click on the + (plus sign) in front of Ports (Com &

LPT), CyberSerial PCI 16Cxxx... should be

displayed.

3. Double click Multifunction adapters, SIIG

CyberPro 1S PCI board should be displayed.

Linux Kernel 2.4.x or later

1. Open the terminal.

2. Type setserial -/jointfilesconvert/263745/bg /dev/ttyS* and hit <enter> to

show the current serial ports installed. SIIG board

will be set up at the next available address. For

example, if your system comes with /dev/ttyS0

and /dev/ttyS1, set up SIIG board as /dev/tty2.

3. Type lspci -v and hit <enter>. This command

displays the CyberSerial Dual PCI's information

similar to the example listed below. This

information is needed to configure the serial ports.

- 02:0b.0 Serial controller: Oxford Semiconductor

Ltd EXSYS EX-41092 Dual 16950 Serial ....

- Subsystem: SIIG Inc: ....

- Flags: medium devsel, IRQ 9

- I/O ports at a000 [size=32]

- Memory at ed800000 (32-bit, ...) ....

- I/O ports at 9800 [size=32]

- Memory at ed000000 (32-bit, ...) ....

- Capabilities: [40] Power Management ....

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

SIIG PCI-1S+DOS Bedienungsanleitung Seite 8