SIIG UltraATA 133 PCI RAID Installationsanleitung

1UltraATA 133 PCIQuick Installation Guide04-0233DIntroducing the UltraATA 133 PCIThe UltraATA 133 PCI is an ultra high-speed dual channelUltra ATA/133

10To Verify Windows 2000/XP/2003 Installation1. Right click My Computer and click Manage.2. Select Device Manager.3. Double click SCSI and RAID Contro

11Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers!Simply visit our website at www.siig.com and click on Support.Our online

UltraATA 133 PCI is a trademark of SIIG, Inc.SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows areregistered trademark

2Package Contents• UltraATA 133 PCI adapter• Driver diskette• 40-pin/80-wire Ultra ATA cable• This quick installation guideLayoutIDE1IDE2Jumper On(do

31. Turn OFF the power to your computer and anyother connected peripheral devices.2. Unplug the power cord from the back of thecomputer.3. Remove your

44. The Ultra ATA ribbon cable has two connectors. Ifyou install only one drive, connect it to the endconnector of the cable. On the other hand, if

5Windows 98SEFor New Windows 98SE Installation1. Install the board and follow Microsoft procedures toinstall Windows 98SE accordingly.2. Once Windows

6Windows MEFor New Windows ME Installation1. Install the board and follow Microsoft procedures toinstall Windows ME accordingly.2. Once Windows has be

73. Highlight Silicon Image SiI 0680 ATA/133Controller and click Properties. A message Thisdevice is working properly is displayed in the dialogbox,

8To Verify Windows NT 4.0 Installation1. Double click My Computer/Control Panel/SCSIAdapters.2. Highlight Silicon Image SiI 0680 ATA/133Controller fr

9Windows XP/Server 2003For New Windows XP/Server 2003 Installation1. Install the board and follow Microsoft procedures toinstall Windows XP accordingl