SIIG SATA II PCIe RAID Installationsanleitung PDF herunterladen (Seite 6)

RAID 0 (Striping)

This RAID array to be used on New/Blank hard drives.

Striping will destroy existing data on the hard drive.

Auto Configuration is recommended. For applications

that require custom chunk size, Manual Configuration

is offered.

Auto Configuration (recommended)

The default chunk size is 64k when selecting Auto

configuration.

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

2. At the next screen select Create RAID Set, then

press Enter.

3. Select RAID0, then press Enter.

4. Select Auto configuration, then press Enter.

5. Input the RAID size, press Enter.

6. When asked Are You Sure (Y/N)?, press Y to accept.

7. Press Ctrl+E to exit the BIOS.

8. When asked Are you sure to exit (Y/N)?, press Y to

exit and reboot.

9. Continue with Fdisk and Format steps as if you

were installing a conventional hard drive.

Manual Configuration

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

2. At the next screen select Create RAID Set, then

press Enter.

3. Select RAID0, then press Enter.

4. Select Manual configuration then press Enter.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Keine Kommentare

SIIG SATA II PCIe RAID Installationsanleitung Seite 6