SIIG USB 2.0 Video Capture Device Bedienungsanleitung PDF herunterladen (Seite 8)

8

5. At Hi Vision USB DVD Maker Setup

Wizard, click Start.

Note: If the capture device is not plugged

into the computer or improperly detected

by the computer, the installation will stop.

If this occurs, insert the capture device or

move the capture device to a different USB

port and start again.

6. Wait while the files are copied to the hard

disk. Depending on your system hardware

this may take several minutes to complete.

Do not interrupt this process.

7. Click OK to complete the driver installation.

8. Connect your source device (VCR, CD-

ROM, DVD, etc) to the capture device's

video inputs and turn it on.

Note: Connect your source device to either

the composite (Red, White, Yellow)

connectors

OR S-Video (S-Video, Red,

White) connectors, see Layout on page 3

for more information.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare