SIIG Serial ATA PCI Installationsanleitung PDF herunterladen (Seite 11)

3. Select Search for a suitable driver for my device

(recommended) and click Next.

4. Insert the driver CD, check CD-ROM drives, uncheck

the other boxes, and click Next. Click Next again to

continue.

5. Click Finish, remove the driver CD and restart

Windows to complete the installation.

To Verify Windows 2000/XP/2003 Installation

1. Right click My Computer and click Manage.

2. Select Device Manager.

3. Double click SCSI and RAID Controllers, Silicon

Image SiI 3512... Controller should be displayed.

Windows Server 2008 (32-bit)

New Windows Server 2008 Installation

1. Install the board and follow Microsoft procedures

to install Windows accordingly.

2. At Where do you want to install Windows?, click

Load Driver.

3. Insert driver CD, then click Browse.

4. Click CD Drive...Drivers, then click OK.

5. Select Silicon Image Sil 3512 SATALink

Controller..., then click OK

6. Follow on-screen instructions to complete Windows

Server 2008 installation.

Existing Windows Server 2008 Installation

1. Install the board and boot up Windows.

2. At the Found New Hardware Wizard, select Locate

and install driver software (Recommended), then

click Don't search online.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Keine Kommentare

SIIG Serial ATA PCI Installationsanleitung Seite 11