SIIG PCI-2S+DOS Installationsanleitung PDF herunterladen (Seite 8)

2. Insert the driver CD, check Include this location in

the search, uncheck the other box, type in D:\2003,

then click Next. (Change D: to match your CD-ROM

drive letter)

3. If the Hardware Installation window pops up, click

Continue Anyway, then Finish. Our driver has been

tested for stability and compatibility.

4. Repeat steps 1-3 three more times.

5. Restart Windows to complete the installation.

To Verify Windows 2000/XP/2003 Installation

1. Right click My Computer, click Manage, then click

Device Manager.

2. Click on the + (plus sign) in front of Ports (COM &

LPT), CyberSerial PCI 16Cxxx... should be

displayed two times.

3. Double click Multifunction adapters, SIIG

CyberPro 2S PCI board should be displayed.

Linux Kernel 2.4.x or later

1. Open the terminal.

2. Type setserial -/jointfilesconvert/249118/bg /dev/ttyS* and hit <enter> to

show the current serial ports installed. SIIG board

will be set up at the next available address. For

example, if your system comes with /dev/ttyS0

and /dev/ttyS1, set up SIIG board as /dev/tty2

and /dev/ttyS3.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

SIIG PCI-2S+DOS Installationsanleitung Seite 8