SIIG JU-HS2012-S2 Installationsanleitung PDF herunterladen (Seite 3)

Hardware Installation

The USB to Serial adapter can be hot-plugged into a USB

port of your computer. Important: For Windows 7, Vista

and Server 2008 Do Not plug-in the USB to Serial now,

install the driver first before plugging the USB to Serial

into a USB port.

1. Plug one end of the included USB cable into an

available USB port in your computer.

2. Plug the other end of the included USB cable into the

back of the USB to Serial adapter.

3. If your computer was on when you plugged in the

USB to Serial adapter, go to Driver Installation.

Otherwise, turn on the computer now and continue.

Driver Installation

Windows 7 (32-/64-bit)

The driver must first be installed before you plug the USB

to Serial into a USB port. If you have plugged-in the

adapter prior to installing the driver, unplug it, and then

follow the driver installation below.

1. Insert the driver CD and wait for a few seconds.

Close the AutoPlay box if prompted.

2. Click the Start button. In the Start Search box, type

D:\Vista\install.exe, press Enter. (Change D: to

match your CD/DVD-ROM drive letter)

3. At User Account Control, click Allow.

4. At the Welcome screen, click Next.

5. Select I accept the terms of the license agreement,

click Next, then click Finish.

6. Plug the USB to Serial adapter into a USB port and

the driver will install automatically.

1 2 3 4 5 6 7 8 ... 11 12

Keine Kommentare

SIIG JU-HS2012-S2 Installationsanleitung Seite 3