SIIG JJ-000082-S1 Installationsanleitung PDF herunterladen (Seite 7)

5. Replace the slot bracket's holding screw to secure

the card.

6. Connect PCIe cable into PCIe card and the

ExpressCard Bay, shown in Figure 9.

Figure 9: Connecting PCIe cable into PCIe card and ExpressCard Bay

7. Connect the USB cable to the ExpressCard Bay

pin-out header. Match up Pin 1 (+5VDC) on the

cable connector to Pin 1 (+5VDC) on the

ExpressCard Bay pin-out header. Caution: Refer to

page 5 for proper cable connection. Connecting the cable

improperly may damage your system.

8. Select an available 3.5" or 5.25" drive bay for

mounting the ExpressCard Bay, remove the cover

plate from the selected drive bay. Secure the

ExpressCard Bay to the drive bay by using the

supplied mounting screws.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

SIIG JJ-000082-S1 Installationsanleitung Seite 7